Smartxx installation
Smartxx v2 and Smartxx Halloween

How to install Smartxx (smartxx or smartxx v2 is similar)
On this example, I have use a Smartxx, first generation

directly sold on the motherboard	SmartXX package	solding with pin header

WARNING : DON'T SOLD WIRE ON "EJ"

Smartxx soldering with Pin Header :

Sold the pin header on the motherboard D0 on the motherboard must be sold to the modchip D0 Power on Xbox, modchip light must be flash red/green Don't move the "switch"

Smartxx soldering directly on the motherboard :

Sold modchip on LPC port of the motherboard D0 on the motherboard must be sold to the modchip D0 Power on Xbox, modchip light must be flash red/green Switch n°6 must be move on "ON" position

After soldering modchip, you must flash Smartxx bios.
If you power on with "Eject" buton, modchip is "OFF", and you can see Microsoft dashboard
If you power on with "power" buton, modchip is "ON", and you boot on the Smartxx OS (you don't see Microsoft)

First starting, choose the langage...

First starting, you can save your EEprom

Menu will be appear with 12 bios bank !

For Xbox v. 1.5 :

You shoulc add 2 wires for Xbox 1.5

Just sold as you see on the pic (but don't sold "EJ"wire)